feat: Job Card Enhancements
diff --git a/erpnext/manufacturing/doctype/bom_operation/bom_operation.json b/erpnext/manufacturing/doctype/bom_operation/bom_operation.json
index 07464e3..57062b8 100644
--- a/erpnext/manufacturing/doctype/bom_operation/bom_operation.json
+++ b/erpnext/manufacturing/doctype/bom_operation/bom_operation.json
@@ -13,10 +13,10 @@
"col_break1",
"hour_rate",
"time_in_mins",
- "batch_size",
"operating_cost",
"base_hour_rate",
"base_operating_cost",
+ "batch_size",
"image"
],
"fields": [
@@ -61,6 +61,8 @@
},
{
"description": "In minutes",
+ "fetch_from": "operation.total_operation_time",
+ "fetch_if_empty": 1,
"fieldname": "time_in_mins",
"fieldtype": "Float",
"in_list_view": 1,
@@ -104,7 +106,8 @@
"label": "Image"
},
{
- "default": "1",
+ "fetch_from": "operation.batch_size",
+ "fetch_if_empty": 1,
"fieldname": "batch_size",
"fieldtype": "Int",
"label": "Batch Size"
@@ -120,7 +123,7 @@
"index_web_pages_for_search": 1,
"istable": 1,
"links": [],
- "modified": "2020-10-13 18:14:10.018774",
+ "modified": "2020-12-14 15:01:33.142869",
"modified_by": "Administrator",
"module": "Manufacturing",
"name": "BOM Operation",
diff --git a/erpnext/manufacturing/doctype/job_card/job_card.js b/erpnext/manufacturing/doctype/job_card/job_card.js
index 4e8dd41..57ec20b 100644
--- a/erpnext/manufacturing/doctype/job_card/job_card.js
+++ b/erpnext/manufacturing/doctype/job_card/job_card.js
@@ -11,6 +11,16 @@
}
};
});
+
+ frm.set_indicator_formatter('sub_operation',
+ function(doc) {
+ if (doc.status == "Pending") {
+ return "red";
+ } else {
+ return doc.status === "Complete" ? "green" : "orange";
+ }
+ }
+ );
},
refresh: function(frm) {
@@ -97,81 +107,76 @@
prepare_timer_buttons: function(frm) {
frm.trigger("make_dashboard");
- if (!frm.doc.job_started) {
- frm.add_custom_button(__("Start"), () => {
- if (!frm.doc.employee) {
- frappe.prompt({fieldtype: 'Link', label: __('Employee'), options: "Employee",
- fieldname: 'employee'}, d => {
- if (d.employee) {
- frm.set_value("employee", d.employee);
- } else {
- frm.events.start_job(frm);
- }
- }, __("Enter Value"), __("Start"));
- } else {
- frm.events.start_job(frm);
- }
+
+ if (!frm.doc.started_time && !frm.doc.current_time) {
+ frm.add_custom_button(__("Start Job"), () => {
+ frappe.prompt({fieldtype: 'Table MultiSelect', label: __('Employee'), options: "Job Card Time Log",
+ fieldname: 'employee'}, d => {
+ debugger
+ frm.events.start_job(frm, "Work In Progress", d.employee);
+ }, __("Assign Job to Employee"));
}).addClass("btn-primary");
} else if (frm.doc.status == "On Hold") {
- frm.add_custom_button(__("Resume"), () => {
- frappe.flags.resume_job = 1;
- frm.events.start_job(frm);
+ frm.add_custom_button(__("Resume Job"), () => {
+ frm.events.start_job(frm, "Resume Job");
}).addClass("btn-primary");
} else {
- frm.add_custom_button(__("Pause"), () => {
- frappe.flags.pause_job = 1;
- frm.set_value("status", "On Hold");
- frm.events.complete_job(frm);
+ frm.add_custom_button(__("Pause Job"), () => {
+ frm.events.complete_job(frm, "On Hold");
});
- frm.add_custom_button(__("Complete"), () => {
- let completed_time = frappe.datetime.now_datetime();
- frm.trigger("hide_timer");
-
- if (frm.doc.for_quantity) {
- frappe.prompt({fieldtype: 'Float', label: __('Completed Quantity'),
- fieldname: 'qty', reqd: 1, default: frm.doc.for_quantity}, data => {
- frm.events.complete_job(frm, completed_time, data.qty);
- }, __("Enter Value"), __("Complete"));
- } else {
- frm.events.complete_job(frm, completed_time, 0);
- }
+ frm.add_custom_button(__("Complete Job"), () => {
+ frappe.prompt({fieldtype: 'Float', label: __('Completed Quantity'),
+ fieldname: 'qty', default: frm.doc.for_quantity}, data => {
+ frm.events.complete_job(frm, "Complete", data.qty);
+ }, __("Enter Value"));
}).addClass("btn-primary");
}
},
- start_job: function(frm) {
- let row = frappe.model.add_child(frm.doc, 'Job Card Time Log', 'time_logs');
- row.from_time = frappe.datetime.now_datetime();
- frm.set_value('job_started', 1);
- frm.set_value('started_time' , row.from_time);
- frm.set_value("status", "Work In Progress");
-
- if (!frappe.flags.resume_job) {
- frm.set_value('current_time' , 0);
- }
-
- frm.save();
+ start_job: function(frm, status, employee) {
+ const args = {
+ job_card_id: frm.doc.name,
+ start_time: frappe.datetime.now_datetime(),
+ employee: employee,
+ status: status
+ };
+ frm.events.make_time_log(frm, args);
},
- complete_job: function(frm, completed_time, completed_qty) {
- frm.doc.time_logs.forEach(d => {
- if (d.from_time && !d.to_time) {
- d.to_time = completed_time || frappe.datetime.now_datetime();
- d.completed_qty = completed_qty || 0;
+ complete_job: function(frm, status, completed_qty) {
+ const args = {
+ job_card_id: frm.doc.name,
+ complete_time: frappe.datetime.now_datetime(),
+ status: status,
+ completed_qty: completed_qty
+ };
+ frm.events.make_time_log(frm, args);
+ },
- if(frappe.flags.pause_job) {
- let currentIncrement = moment(d.to_time).diff(moment(d.from_time),"seconds") || 0;
- frm.set_value('current_time' , currentIncrement + (frm.doc.current_time || 0));
- } else {
- frm.set_value('started_time' , '');
- frm.set_value('job_started', 0);
- frm.set_value('current_time' , 0);
- }
+ make_time_log: function(frm, args) {
+ frm.events.update_sub_operation(frm, args);
- frm.save();
+ frappe.call({
+ method: "erpnext.manufacturing.doctype.job_card.job_card.make_time_log",
+ args: {
+ args: args
+ },
+ freeze: true,
+ callback: function (r) {
+ frm.reload_doc();
+ frm.trigger("make_dashboard");
}
- });
+ })
+ },
+
+ update_sub_operation: function(frm, args) {
+ if (frm.doc.sub_operations && frm.doc.sub_operations.length) {
+ let sub_operations = frm.doc.sub_operations.filter(d => d.status != 'Complete');
+ if (sub_operations && sub_operations.length) {
+ args["sub_operation"] = sub_operations[0].sub_operation;
+ }
+ }
},
validate: function(frm) {
@@ -180,18 +185,8 @@
}
},
- employee: function(frm) {
- if (frm.doc.job_started && !frm.doc.current_time) {
- frm.trigger("reset_timer");
- } else {
- frm.events.start_job(frm);
- }
- },
-
reset_timer: function(frm) {
frm.set_value('started_time' , '');
- frm.set_value('job_started', 0);
- frm.set_value('current_time' , 0);
},
make_dashboard: function(frm) {
@@ -297,7 +292,6 @@
},
to_time: function(frm) {
- frm.set_value('job_started', 0);
frm.set_value('started_time', '');
}
})
\ No newline at end of file
diff --git a/erpnext/manufacturing/doctype/job_card/job_card.json b/erpnext/manufacturing/doctype/job_card/job_card.json
index 5713f69..c2fd8cc 100644
--- a/erpnext/manufacturing/doctype/job_card/job_card.json
+++ b/erpnext/manufacturing/doctype/job_card/job_card.json
@@ -9,30 +9,30 @@
"naming_series",
"work_order",
"bom_no",
- "workstation",
- "operation",
- "operation_row_number",
"column_break_4",
"posting_date",
"company",
- "remarks",
"production_section",
"production_item",
"item_name",
"for_quantity",
- "quality_inspection",
- "wip_warehouse",
"column_break_12",
- "employee",
- "employee_name",
- "status",
+ "wip_warehouse",
+ "quality_inspection",
"project",
+ "operation_section_section",
+ "operation",
+ "operation_row_number",
+ "column_break_18",
+ "workstation",
+ "section_break_21",
+ "sub_operations",
"timing_detail",
"time_logs",
"section_break_13",
"total_completed_qty",
- "total_time_in_mins",
"column_break_15",
+ "total_time_in_mins",
"section_break_8",
"items",
"more_information",
@@ -40,7 +40,9 @@
"sequence_id",
"transferred_qty",
"requested_qty",
+ "status",
"column_break_20",
+ "remarks",
"barcode",
"job_started",
"started_time",
@@ -118,13 +120,6 @@
"label": "Timing Detail"
},
{
- "fieldname": "employee",
- "fieldtype": "Link",
- "in_standard_filter": 1,
- "label": "Employee",
- "options": "Employee"
- },
- {
"allow_bulk_edit": 1,
"fieldname": "time_logs",
"fieldtype": "Table",
@@ -133,9 +128,11 @@
},
{
"fieldname": "section_break_13",
- "fieldtype": "Section Break"
+ "fieldtype": "Section Break",
+ "hide_border": 1
},
{
+ "default": "0",
"fieldname": "total_completed_qty",
"fieldtype": "Float",
"label": "Total Completed Qty",
@@ -251,12 +248,7 @@
"reqd": 1
},
{
- "fetch_from": "employee.employee_name",
- "fieldname": "employee_name",
- "fieldtype": "Read Only",
- "label": "Employee Name"
- },
- {
+ "collapsible": 1,
"fieldname": "production_section",
"fieldtype": "Section Break",
"label": "Production"
@@ -314,11 +306,33 @@
"label": "Quality Inspection",
"no_copy": 1,
"options": "Quality Inspection"
+ },
+ {
+ "allow_bulk_edit": 1,
+ "fieldname": "sub_operations",
+ "fieldtype": "Table",
+ "label": "Sub Operations",
+ "options": "Job Card Operation",
+ "read_only": 1
+ },
+ {
+ "fieldname": "operation_section_section",
+ "fieldtype": "Section Break",
+ "label": "Operation Section"
+ },
+ {
+ "fieldname": "column_break_18",
+ "fieldtype": "Column Break"
+ },
+ {
+ "fieldname": "section_break_21",
+ "fieldtype": "Section Break",
+ "hide_border": 1
}
],
"is_submittable": 1,
"links": [],
- "modified": "2020-11-19 18:26:50.531664",
+ "modified": "2020-12-14 15:14:05.566271",
"modified_by": "Administrator",
"module": "Manufacturing",
"name": "Job Card",
diff --git a/erpnext/manufacturing/doctype/job_card/job_card.py b/erpnext/manufacturing/doctype/job_card/job_card.py
index cdc4518..5c157d4 100644
--- a/erpnext/manufacturing/doctype/job_card/job_card.py
+++ b/erpnext/manufacturing/doctype/job_card/job_card.py
@@ -4,12 +4,13 @@
from __future__ import unicode_literals
import frappe
-import datetime
+import datetime, json
from frappe import _, bold
+from six import string_types
from frappe.model.mapper import get_mapped_doc
from frappe.model.document import Document
from frappe.utils import (flt, cint, time_diff_in_hours, get_datetime, getdate,
- get_time, add_to_date, time_diff, add_days, get_datetime_str, get_link_to_form)
+ get_time, add_to_date, time_diff, add_days, get_datetime_str, get_link_to_form, time_diff_in_seconds)
from erpnext.manufacturing.doctype.manufacturing_settings.manufacturing_settings import get_mins_between_operations
@@ -25,9 +26,20 @@
self.set_status()
self.validate_operation_id()
self.validate_sequence_id()
+ self.get_sub_operations()
+ self.update_sub_operation_status()
+
+ def get_sub_operations(self):
+ if self.operation:
+ self.sub_operations = []
+ for row in frappe.get_all("Sub Operation",
+ filters = {"parent": self.operation}, fields=["operation"]):
+ self.append("sub_operations", {
+ "sub_operation": row.operation,
+ "status": "Pending"
+ })
def validate_time_logs(self):
- self.total_completed_qty = 0.0
self.total_time_in_mins = 0.0
if self.get('time_logs'):
@@ -46,6 +58,8 @@
if d.completed_qty:
self.total_completed_qty += d.completed_qty
+ else:
+ self.total_completed_qty = 0.0
self.total_completed_qty = flt(self.total_completed_qty, self.precision("total_completed_qty"))
@@ -57,7 +71,7 @@
self.workstation, 'production_capacity') or 1
validate_overlap_for = " and jc.workstation = %(workstation)s "
- if self.employee:
+ if args.get("employee"):
# override capacity for employee
production_capacity = 1
validate_overlap_for = " and jc.employee = %(employee)s "
@@ -80,7 +94,7 @@
"to_time": args.to_time,
"name": args.name or "No Name",
"parent": args.parent or "No Name",
- "employee": self.employee,
+ "employee": args.get("employee"),
"workstation": self.workstation
}, as_dict=True)
@@ -158,6 +172,66 @@
row.planned_start_time = datetime.datetime.combine(start_date,
get_time(workstation_doc.working_hours[0].start_time))
+ def add_time_log(self, args):
+ last_row = []
+ if self.time_logs and len(self.time_logs) > 0:
+ last_row = self.time_logs[-1]
+
+ self.reset_timer_value(args)
+ if last_row and args.get("complete_time"):
+ last_row.update({
+ "to_time": get_datetime(args.get("complete_time")),
+ "operation": args.get("sub_operation"),
+ "completed_qty": args.get("completed_qty") or 0.0
+ })
+ elif args.get("start_time"):
+ self.append("time_logs", {
+ "from_time": get_datetime(args.get("start_time")),
+ "employee": args.get("employee"),
+ "operation": args.get("sub_operation"),
+ "completed_qty": 0.0
+ })
+
+ if self.status == "On Hold":
+ self.current_time = time_diff_in_seconds(last_row.to_time, last_row.from_time)
+
+ self.save()
+
+ def reset_timer_value(self, args):
+ self.started_time = None
+
+ if args.get("status") in ["Work In Progress", "Complete"]:
+ self.current_time = 0.0
+
+ if args.get("status") == "Work In Progress":
+ self.started_time = get_datetime(args.get("start_time"))
+
+ if args.get("status") == "Resume Job":
+ args["status"] = "Work In Progress"
+
+ if args.get("status"):
+ self.status = args.get("status")
+
+ def update_sub_operation_status(self):
+ if not (self.sub_operations and self.time_logs): return
+
+ operation_wise_completed_time = {}
+ for time_log in self.time_logs:
+ if time_log.operation not in operation_wise_completed_time:
+ operation_wise_completed_time.setdefault(time_log.operation,
+ frappe._dict({"status": "Pending", "completed_time": 0.0}))
+
+ op_row = operation_wise_completed_time[time_log.operation]
+ op_row.status = "Work In Progress" if not time_log.time_in_mins else "Complete"
+ if time_log.time_in_mins:
+ op_row.completed_time += time_log.time_in_mins
+
+ for row in self.sub_operations:
+ operation_deatils = operation_wise_completed_time.get(row.sub_operation)
+ if operation_deatils:
+ row.status = operation_deatils.status
+ row.completed_time = operation_deatils.completed_time
+
def update_time_logs(self, row):
self.append("time_logs", {
"from_time": row.planned_start_time,
@@ -376,6 +450,17 @@
frappe.throw(_("{0}, complete the operation {1} before the operation {2}.")
.format(message, bold(row.operation), bold(self.operation)), OperationSequenceError)
+
+@frappe.whitelist()
+def make_time_log(args):
+ if isinstance(args, string_types):
+ args = json.loads(args)
+
+ args = frappe._dict(args)
+ doc = frappe.get_doc("Job Card", args.job_card_id)
+ doc.validate_sequence_id()
+ doc.add_time_log(args)
+
@frappe.whitelist()
def get_operation_details(work_order, operation):
if work_order and operation:
diff --git a/erpnext/manufacturing/doctype/job_card_operation/__init__.py b/erpnext/manufacturing/doctype/job_card_operation/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/erpnext/manufacturing/doctype/job_card_operation/__init__.py
diff --git a/erpnext/manufacturing/doctype/job_card_operation/job_card_operation.json b/erpnext/manufacturing/doctype/job_card_operation/job_card_operation.json
new file mode 100644
index 0000000..be81902
--- /dev/null
+++ b/erpnext/manufacturing/doctype/job_card_operation/job_card_operation.json
@@ -0,0 +1,52 @@
+{
+ "actions": [],
+ "creation": "2020-12-07 16:58:38.449041",
+ "doctype": "DocType",
+ "editable_grid": 1,
+ "engine": "InnoDB",
+ "field_order": [
+ "sub_operation",
+ "completed_time",
+ "status"
+ ],
+ "fields": [
+ {
+ "default": "Pending",
+ "fieldname": "status",
+ "fieldtype": "Select",
+ "in_list_view": 1,
+ "label": "Status",
+ "options": "Complete\nPause\nPending\nWork In Progress",
+ "read_only": 1
+ },
+ {
+ "description": "In mins",
+ "fieldname": "completed_time",
+ "fieldtype": "Data",
+ "in_list_view": 1,
+ "label": "Completed Time",
+ "read_only": 1
+ },
+ {
+ "fieldname": "sub_operation",
+ "fieldtype": "Link",
+ "in_list_view": 1,
+ "label": "Operation",
+ "options": "Operation",
+ "read_only": 1
+ }
+ ],
+ "index_web_pages_for_search": 1,
+ "istable": 1,
+ "links": [],
+ "modified": "2020-12-14 17:08:25.992957",
+ "modified_by": "Administrator",
+ "module": "Manufacturing",
+ "name": "Job Card Operation",
+ "owner": "Administrator",
+ "permissions": [],
+ "quick_entry": 1,
+ "sort_field": "modified",
+ "sort_order": "DESC",
+ "track_changes": 1
+}
\ No newline at end of file
diff --git a/erpnext/manufacturing/doctype/job_card_operation/job_card_operation.py b/erpnext/manufacturing/doctype/job_card_operation/job_card_operation.py
new file mode 100644
index 0000000..85d7298
--- /dev/null
+++ b/erpnext/manufacturing/doctype/job_card_operation/job_card_operation.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8 -*-
+# Copyright (c) 2020, Frappe Technologies Pvt. Ltd. and contributors
+# For license information, please see license.txt
+
+from __future__ import unicode_literals
+# import frappe
+from frappe.model.document import Document
+
+class JobCardOperation(Document):
+ pass
diff --git a/erpnext/manufacturing/doctype/job_card_time_log/job_card_time_log.json b/erpnext/manufacturing/doctype/job_card_time_log/job_card_time_log.json
index 9dd54dd..a7102d7 100644
--- a/erpnext/manufacturing/doctype/job_card_time_log/job_card_time_log.json
+++ b/erpnext/manufacturing/doctype/job_card_time_log/job_card_time_log.json
@@ -1,14 +1,17 @@
{
+ "actions": [],
"creation": "2019-03-08 23:56:43.187569",
"doctype": "DocType",
"editable_grid": 1,
"engine": "InnoDB",
"field_order": [
+ "employee",
"from_time",
"to_time",
"column_break_2",
"time_in_mins",
- "completed_qty"
+ "completed_qty",
+ "operation"
],
"fields": [
{
@@ -41,10 +44,27 @@
"in_list_view": 1,
"label": "Completed Qty",
"reqd": 1
+ },
+ {
+ "fieldname": "employee",
+ "fieldtype": "Link",
+ "in_list_view": 1,
+ "label": "Employee",
+ "options": "Employee"
+ },
+ {
+ "fieldname": "operation",
+ "fieldtype": "Link",
+ "label": "Operation",
+ "no_copy": 1,
+ "options": "Operation",
+ "read_only": 1
}
],
+ "index_web_pages_for_search": 1,
"istable": 1,
- "modified": "2019-12-03 12:56:02.285448",
+ "links": [],
+ "modified": "2020-12-23 14:30:00.970916",
"modified_by": "Administrator",
"module": "Manufacturing",
"name": "Job Card Time Log",
diff --git a/erpnext/manufacturing/doctype/manufacturing_settings/manufacturing_settings.json b/erpnext/manufacturing/doctype/manufacturing_settings/manufacturing_settings.json
index b7634da..6647be5 100644
--- a/erpnext/manufacturing/doctype/manufacturing_settings/manufacturing_settings.json
+++ b/erpnext/manufacturing/doctype/manufacturing_settings/manufacturing_settings.json
@@ -26,7 +26,9 @@
"column_break_16",
"overproduction_percentage_for_work_order",
"other_settings_section",
- "update_bom_costs_automatically"
+ "update_bom_costs_automatically",
+ "column_break_23",
+ "make_serial_no_batch_from_work_order"
],
"fields": [
{
@@ -155,13 +157,24 @@
{
"fieldname": "column_break_5",
"fieldtype": "Column Break"
+ },
+ {
+ "fieldname": "column_break_23",
+ "fieldtype": "Column Break"
+ },
+ {
+ "default": "0",
+ "description": "System will automatically create the serial numbers / batch for the Finished Good on submission of work order",
+ "fieldname": "make_serial_no_batch_from_work_order",
+ "fieldtype": "Check",
+ "label": "Make Serial No / Batch from Work Order"
}
],
"icon": "icon-wrench",
"index_web_pages_for_search": 1,
"issingle": 1,
"links": [],
- "modified": "2020-10-13 10:55:43.996581",
+ "modified": "2020-12-08 13:37:40.325838",
"modified_by": "Administrator",
"module": "Manufacturing",
"name": "Manufacturing Settings",
@@ -178,4 +191,4 @@
"sort_field": "modified",
"sort_order": "DESC",
"track_changes": 1
-}
+}
\ No newline at end of file
diff --git a/erpnext/manufacturing/doctype/operation/operation.js b/erpnext/manufacturing/doctype/operation/operation.js
index 5c2aba6..9bfcc6e 100644
--- a/erpnext/manufacturing/doctype/operation/operation.js
+++ b/erpnext/manufacturing/doctype/operation/operation.js
@@ -2,7 +2,5 @@
// For license information, please see license.txt
frappe.ui.form.on('Operation', {
- refresh: function(frm) {
- }
-});
+});
\ No newline at end of file
diff --git a/erpnext/manufacturing/doctype/operation/operation.json b/erpnext/manufacturing/doctype/operation/operation.json
index c231fba..9e6f8e1 100644
--- a/erpnext/manufacturing/doctype/operation/operation.json
+++ b/erpnext/manufacturing/doctype/operation/operation.json
@@ -1,167 +1,133 @@
{
- "allow_copy": 0,
- "allow_import": 1,
- "allow_rename": 1,
- "autoname": "Prompt",
- "beta": 0,
- "creation": "2014-11-07 16:20:30.683186",
- "custom": 0,
- "docstatus": 0,
- "doctype": "DocType",
- "document_type": "Setup",
- "editable_grid": 0,
- "engine": "InnoDB",
+ "actions": [],
+ "allow_import": 1,
+ "allow_rename": 1,
+ "autoname": "Prompt",
+ "creation": "2014-11-07 16:20:30.683186",
+ "doctype": "DocType",
+ "document_type": "Setup",
+ "engine": "InnoDB",
+ "field_order": [
+ "workstation",
+ "data_2",
+ "cost_of_poor_quality_operation",
+ "job_card_section",
+ "create_job_card_based_on_batch_size",
+ "column_break_6",
+ "batch_size",
+ "sub_operations_section",
+ "sub_operations",
+ "total_operation_time",
+ "section_break_4",
+ "description"
+ ],
"fields": [
{
- "allow_on_submit": 0,
- "bold": 0,
- "collapsible": 0,
- "columns": 0,
- "fieldname": "workstation",
- "fieldtype": "Link",
- "hidden": 0,
- "ignore_user_permissions": 0,
- "ignore_xss_filter": 0,
- "in_filter": 0,
- "in_list_view": 1,
- "in_standard_filter": 1,
- "label": "Default Workstation",
- "length": 0,
- "no_copy": 0,
- "options": "Workstation",
- "permlevel": 0,
- "precision": "",
- "print_hide": 0,
- "print_hide_if_no_value": 0,
- "read_only": 0,
- "remember_last_selected_value": 0,
- "report_hide": 0,
- "reqd": 0,
- "search_index": 0,
- "set_only_once": 0,
- "unique": 0
- },
+ "fieldname": "workstation",
+ "fieldtype": "Link",
+ "in_list_view": 1,
+ "in_standard_filter": 1,
+ "label": "Default Workstation",
+ "options": "Workstation"
+ },
{
- "allow_on_submit": 0,
- "bold": 0,
- "collapsible": 0,
- "columns": 0,
- "fieldname": "section_break_4",
- "fieldtype": "Section Break",
- "hidden": 0,
- "ignore_user_permissions": 0,
- "ignore_xss_filter": 0,
- "in_filter": 0,
- "in_list_view": 0,
- "in_standard_filter": 0,
- "length": 0,
- "no_copy": 0,
- "permlevel": 0,
- "precision": "",
- "print_hide": 0,
- "print_hide_if_no_value": 0,
- "read_only": 0,
- "remember_last_selected_value": 0,
- "report_hide": 0,
- "reqd": 0,
- "search_index": 0,
- "set_only_once": 0,
- "unique": 0
- },
+ "collapsible": 1,
+ "fieldname": "section_break_4",
+ "fieldtype": "Section Break",
+ "label": "Operation Description"
+ },
{
- "allow_on_submit": 0,
- "bold": 0,
- "collapsible": 0,
- "columns": 0,
- "fieldname": "description",
- "fieldtype": "Text",
- "hidden": 0,
- "ignore_user_permissions": 0,
- "ignore_xss_filter": 0,
- "in_filter": 0,
- "in_list_view": 0,
- "in_standard_filter": 0,
- "label": "Description",
- "length": 0,
- "no_copy": 0,
- "permlevel": 0,
- "precision": "",
- "print_hide": 0,
- "print_hide_if_no_value": 0,
- "read_only": 0,
- "remember_last_selected_value": 0,
- "report_hide": 0,
- "reqd": 0,
- "search_index": 0,
- "set_only_once": 0,
- "unique": 0
+ "fieldname": "description",
+ "fieldtype": "Text",
+ "label": "Description"
+ },
+ {
+ "collapsible": 1,
+ "fieldname": "sub_operations_section",
+ "fieldtype": "Section Break",
+ "label": "Sub Operations"
+ },
+ {
+ "fieldname": "sub_operations",
+ "fieldtype": "Table",
+ "options": "Sub Operation"
+ },
+ {
+ "description": "Time in mins.",
+ "fieldname": "total_operation_time",
+ "fieldtype": "Float",
+ "label": "Total Operation Time",
+ "read_only": 1
+ },
+ {
+ "fieldname": "data_2",
+ "fieldtype": "Column Break"
+ },
+ {
+ "default": "1",
+ "depends_on": "create_job_card_based_on_batch_size",
+ "fieldname": "batch_size",
+ "fieldtype": "Int",
+ "label": "Batch Size",
+ "mandatory_depends_on": "create_job_card_based_on_batch_size"
+ },
+ {
+ "default": "0",
+ "fieldname": "create_job_card_based_on_batch_size",
+ "fieldtype": "Check",
+ "label": "Create Job Card based on Batch Size"
+ },
+ {
+ "default": "0",
+ "description": "Cost of poor quality operation",
+ "fieldname": "cost_of_poor_quality_operation",
+ "fieldtype": "Check",
+ "label": "Is COPQ Operation"
+ },
+ {
+ "collapsible": 1,
+ "fieldname": "job_card_section",
+ "fieldtype": "Section Break",
+ "label": "Job Card"
+ },
+ {
+ "fieldname": "column_break_6",
+ "fieldtype": "Column Break"
}
- ],
- "hide_heading": 0,
- "hide_toolbar": 0,
- "icon": "fa fa-wrench",
- "idx": 0,
- "image_view": 0,
- "in_create": 0,
-
- "is_submittable": 0,
- "issingle": 0,
- "istable": 0,
- "max_attachments": 0,
- "modified": "2016-11-07 05:28:27.462413",
- "modified_by": "Administrator",
- "module": "Manufacturing",
- "name": "Operation",
- "name_case": "",
- "owner": "Administrator",
+ ],
+ "icon": "fa fa-wrench",
+ "index_web_pages_for_search": 1,
+ "links": [],
+ "modified": "2020-12-24 14:25:03.428303",
+ "modified_by": "Administrator",
+ "module": "Manufacturing",
+ "name": "Operation",
+ "owner": "Administrator",
"permissions": [
{
- "amend": 0,
- "apply_user_permissions": 0,
- "cancel": 0,
- "create": 1,
- "delete": 1,
- "email": 0,
- "export": 1,
- "if_owner": 0,
- "import": 1,
- "is_custom": 0,
- "permlevel": 0,
- "print": 0,
- "read": 1,
- "report": 0,
- "role": "Manufacturing User",
- "set_user_permissions": 0,
- "share": 1,
- "submit": 0,
+ "create": 1,
+ "delete": 1,
+ "export": 1,
+ "import": 1,
+ "read": 1,
+ "role": "Manufacturing User",
+ "share": 1,
"write": 1
- },
+ },
{
- "amend": 0,
- "apply_user_permissions": 0,
- "cancel": 0,
- "create": 1,
- "delete": 1,
- "email": 0,
- "export": 1,
- "if_owner": 0,
- "import": 1,
- "is_custom": 0,
- "permlevel": 0,
- "print": 0,
- "read": 1,
- "report": 1,
- "role": "Manufacturing Manager",
- "set_user_permissions": 0,
- "share": 1,
- "submit": 0,
+ "create": 1,
+ "delete": 1,
+ "export": 1,
+ "import": 1,
+ "read": 1,
+ "report": 1,
+ "role": "Manufacturing Manager",
+ "share": 1,
"write": 1
}
- ],
- "quick_entry": 1,
- "read_only": 0,
- "read_only_onload": 0,
- "sort_field": "modified",
- "sort_order": "DESC",
- "track_seen": 0
+ ],
+ "quick_entry": 1,
+ "sort_field": "modified",
+ "sort_order": "DESC",
+ "track_changes": 1
}
\ No newline at end of file
diff --git a/erpnext/manufacturing/doctype/operation/operation.py b/erpnext/manufacturing/doctype/operation/operation.py
index 69e8329..aaf0d5c 100644
--- a/erpnext/manufacturing/doctype/operation/operation.py
+++ b/erpnext/manufacturing/doctype/operation/operation.py
@@ -2,9 +2,35 @@
# For license information, please see license.txt
from __future__ import unicode_literals
+
+import frappe
+from frappe import _
+from frappe.utils import flt
from frappe.model.document import Document
class Operation(Document):
def validate(self):
if not self.description:
self.description = self.name
+
+ self.duplicate_sub_operation()
+ self.set_total_time()
+
+ def duplicate_sub_operation(self):
+ operation_list = []
+ for row in self.sub_operations:
+ if row.operation in operation_list:
+ frappe.throw(_("The operation {0} can not add multiple times")
+ .format(frappe.bold(row.operation)))
+
+ if self.name == row.operation:
+ frappe.throw(_("The operation {0} can not be the sub operation")
+ .format(frappe.bold(row.operation)))
+
+ operation_list.append(row.operation)
+
+ def set_total_time(self):
+ self.total_operation_time = 0.0
+
+ for row in self.sub_operations:
+ self.total_operation_time += row.time_in_mins
diff --git a/erpnext/manufacturing/doctype/sub_operation/__init__.py b/erpnext/manufacturing/doctype/sub_operation/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/erpnext/manufacturing/doctype/sub_operation/__init__.py
diff --git a/erpnext/manufacturing/doctype/sub_operation/sub_operation.js b/erpnext/manufacturing/doctype/sub_operation/sub_operation.js
new file mode 100644
index 0000000..be9db6a
--- /dev/null
+++ b/erpnext/manufacturing/doctype/sub_operation/sub_operation.js
@@ -0,0 +1,8 @@
+// Copyright (c) 2020, Frappe Technologies Pvt. Ltd. and contributors
+// For license information, please see license.txt
+
+frappe.ui.form.on('Sub Operation', {
+ // refresh: function(frm) {
+
+ // }
+});
diff --git a/erpnext/manufacturing/doctype/sub_operation/sub_operation.json b/erpnext/manufacturing/doctype/sub_operation/sub_operation.json
new file mode 100644
index 0000000..f63d2b9
--- /dev/null
+++ b/erpnext/manufacturing/doctype/sub_operation/sub_operation.json
@@ -0,0 +1,51 @@
+{
+ "actions": [],
+ "creation": "2020-12-07 15:39:47.488519",
+ "doctype": "DocType",
+ "editable_grid": 1,
+ "engine": "InnoDB",
+ "field_order": [
+ "operation",
+ "time_in_mins",
+ "column_break_5",
+ "description"
+ ],
+ "fields": [
+ {
+ "fieldname": "operation",
+ "fieldtype": "Link",
+ "in_list_view": 1,
+ "label": "Operation",
+ "options": "Operation"
+ },
+ {
+ "description": "Time in mins",
+ "fieldname": "time_in_mins",
+ "fieldtype": "Float",
+ "in_list_view": 1,
+ "label": "Operation Time"
+ },
+ {
+ "fieldname": "column_break_5",
+ "fieldtype": "Column Break"
+ },
+ {
+ "fieldname": "description",
+ "fieldtype": "Small Text",
+ "label": "Description"
+ }
+ ],
+ "index_web_pages_for_search": 1,
+ "istable": 1,
+ "links": [],
+ "modified": "2020-12-07 18:09:18.005578",
+ "modified_by": "Administrator",
+ "module": "Manufacturing",
+ "name": "Sub Operation",
+ "owner": "Administrator",
+ "permissions": [],
+ "quick_entry": 1,
+ "sort_field": "modified",
+ "sort_order": "DESC",
+ "track_changes": 1
+}
\ No newline at end of file
diff --git a/erpnext/manufacturing/doctype/sub_operation/sub_operation.py b/erpnext/manufacturing/doctype/sub_operation/sub_operation.py
new file mode 100644
index 0000000..f4b2775
--- /dev/null
+++ b/erpnext/manufacturing/doctype/sub_operation/sub_operation.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8 -*-
+# Copyright (c) 2020, Frappe Technologies Pvt. Ltd. and contributors
+# For license information, please see license.txt
+
+from __future__ import unicode_literals
+# import frappe
+from frappe.model.document import Document
+
+class SubOperation(Document):
+ pass
diff --git a/erpnext/manufacturing/doctype/sub_operation/test_sub_operation.py b/erpnext/manufacturing/doctype/sub_operation/test_sub_operation.py
new file mode 100644
index 0000000..d3410ca
--- /dev/null
+++ b/erpnext/manufacturing/doctype/sub_operation/test_sub_operation.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8 -*-
+# Copyright (c) 2020, Frappe Technologies Pvt. Ltd. and Contributors
+# See license.txt
+from __future__ import unicode_literals
+
+# import frappe
+import unittest
+
+class TestSubOperation(unittest.TestCase):
+ pass
diff --git a/erpnext/manufacturing/doctype/work_order/work_order.js b/erpnext/manufacturing/doctype/work_order/work_order.js
index 8088d93..6017349 100644
--- a/erpnext/manufacturing/doctype/work_order/work_order.js
+++ b/erpnext/manufacturing/doctype/work_order/work_order.js
@@ -141,8 +141,7 @@
}
if (frm.doc.docstatus === 1
- && frm.doc.operations && frm.doc.operations.length
- && frm.doc.qty != frm.doc.material_transferred_for_manufacturing) {
+ && frm.doc.operations && frm.doc.operations.length) {
const not_completed = frm.doc.operations.filter(d => {
if(d.status != 'Completed') {
diff --git a/erpnext/manufacturing/doctype/work_order/work_order.json b/erpnext/manufacturing/doctype/work_order/work_order.json
index cd9edee..cb3c942 100644
--- a/erpnext/manufacturing/doctype/work_order/work_order.json
+++ b/erpnext/manufacturing/doctype/work_order/work_order.json
@@ -21,6 +21,13 @@
"produced_qty",
"sales_order",
"project",
+ "serial_no_and_batch_for_finished_good_section",
+ "has_serial_no",
+ "has_batch_no",
+ "column_break_17",
+ "serial_no",
+ "batch_size",
+ "batches",
"settings_section",
"allow_alternative_item",
"use_multi_level_bom",
@@ -488,6 +495,54 @@
"fieldtype": "Float",
"label": "Lead Time",
"read_only": 1
+ },
+ {
+ "collapsible": 1,
+ "depends_on": "eval:!doc.__islocal",
+ "fieldname": "serial_no_and_batch_for_finished_good_section",
+ "fieldtype": "Section Break",
+ "label": "Serial No and Batch for Finished Good"
+ },
+ {
+ "fieldname": "column_break_17",
+ "fieldtype": "Column Break"
+ },
+ {
+ "default": "0",
+ "fetch_from": "production_item.has_serial_no",
+ "fieldname": "has_serial_no",
+ "fieldtype": "Check",
+ "label": "Has Serial No",
+ "read_only": 1
+ },
+ {
+ "default": "0",
+ "fetch_from": "production_item.has_batch_no",
+ "fieldname": "has_batch_no",
+ "fieldtype": "Check",
+ "label": "Has Batch No",
+ "read_only": 1
+ },
+ {
+ "depends_on": "has_serial_no",
+ "fieldname": "serial_no",
+ "fieldtype": "Small Text",
+ "label": "Serial Nos"
+ },
+ {
+ "default": "0",
+ "depends_on": "has_batch_no",
+ "fieldname": "batch_size",
+ "fieldtype": "Float",
+ "label": "Batch Size"
+ },
+ {
+ "depends_on": "has_batch_no",
+ "fieldname": "batches",
+ "fieldtype": "Table",
+ "label": "Batches",
+ "options": "Work Order Batch",
+ "read_only": 1
}
],
"icon": "fa fa-cogs",
diff --git a/erpnext/manufacturing/doctype/work_order/work_order.py b/erpnext/manufacturing/doctype/work_order/work_order.py
index 2600790..587204c 100644
--- a/erpnext/manufacturing/doctype/work_order/work_order.py
+++ b/erpnext/manufacturing/doctype/work_order/work_order.py
@@ -19,6 +19,8 @@
from erpnext.stock.utils import get_bin, validate_warehouse_company, get_latest_stock_qty
from erpnext.utilities.transaction_base import validate_uom_is_integer
from frappe.model.mapper import get_mapped_doc
+from erpnext.stock.doctype.batch.batch import make_batch
+from erpnext.stock.doctype.serial_no.serial_no import get_serial_nos, get_auto_serial_nos, auto_make_serial_nos
class OverProductionError(frappe.ValidationError): pass
class CapacityError(frappe.ValidationError): pass
@@ -40,6 +42,7 @@
self.set_onload("overproduction_percentage", ms.overproduction_percentage_for_work_order)
def validate(self):
+ self.set("batches", [])
self.validate_production_item()
if self.bom_no:
validate_bom_no(self.production_item, self.bom_no)
@@ -235,6 +238,9 @@
production_plan.run_method("update_produced_qty", produced_qty, self.production_plan_item)
+ def before_submit(self):
+ self.create_serial_no_batch_no()
+
def on_submit(self):
if not self.wip_warehouse:
frappe.throw(_("Work-in-Progress Warehouse is required before Submit"))
@@ -266,6 +272,67 @@
self.update_planned_qty()
self.update_ordered_qty()
self.update_reserved_qty_for_production()
+ self.delete_auto_created_batch_and_serial_no()
+
+ def create_serial_no_batch_no(self):
+ if not (self.has_serial_no or self.has_batch_no): return
+
+ if not cint(frappe.db.get_single_value("Manufacturing Settings",
+ "make_serial_no_batch_from_work_order")): return
+
+ if self.has_batch_no:
+ self.set("batches", [])
+ self.create_batch_for_finished_good()
+
+ args = {"item_code": self.production_item}
+
+ if self.has_serial_no:
+ self.make_serial_nos(args)
+
+ def create_batch_for_finished_good(self):
+ total_qty = self.qty
+ if not self.batch_size:
+ self.batch_size = total_qty
+
+ while total_qty > 0:
+ qty = self.batch_size
+ if self.batch_size >= total_qty:
+ qty = total_qty
+
+ if total_qty > self.batch_size:
+ total_qty -= self.batch_size
+ else:
+ qty = total_qty
+ total_qty = 0
+
+ batch = make_batch(self.production_item)
+ self.append("batches", {
+ "batch_no": batch,
+ "qty": qty,
+ })
+
+ def delete_auto_created_batch_and_serial_no(self):
+ if self.serial_no:
+ for d in get_serial_nos(self.serial_no):
+ frappe.delete_doc("Serial No", d)
+
+ for row in self.batches:
+ batch_no = row.batch_no
+ row.db_set("batch_no", None)
+ frappe.delete_doc("Batch", batch_no)
+
+ def make_serial_nos(self, args):
+ serial_no_series = frappe.get_cached_value("Item", self.production_item, "serial_no_series")
+ if serial_no_series:
+ self.serial_no = get_auto_serial_nos(serial_no_series, self.qty)
+ elif self.serial_no:
+ args.update({"serial_no": self.serial_no, "actual_qty": self.qty, "batch_no": self.batch_no})
+ self.serial_no = auto_make_serial_nos(args)
+
+ serial_nos_length = len(get_serial_nos(self.serial_no))
+ if serial_nos_length != self.qty:
+ frappe.throw(_("{0} Serial Numbers required for Item {1}. You have provided {2}.")
+ .format(self.qty, self.production_item, serial_nos_length), SerialNoQtyError)
def create_job_card(self):
manufacturing_settings_doc = frappe.get_doc("Manufacturing Settings")
@@ -273,32 +340,51 @@
enable_capacity_planning = not cint(manufacturing_settings_doc.disable_capacity_planning)
plan_days = cint(manufacturing_settings_doc.capacity_planning_for_days) or 30
- for i, row in enumerate(self.operations):
- self.set_operation_start_end_time(i, row)
+ for index, row in enumerate(self.operations):
+ qty = self.qty
+ i=0
+ while qty > 0:
+ i += 1
+ if not cint(frappe.db.get_value("Operation",
+ row.operation, "create_job_card_based_on_batch_size")):
+ row.batch_size = self.qty
- if not row.workstation:
- frappe.throw(_("Row {0}: select the workstation against the operation {1}")
- .format(row.idx, row.operation))
+ job_card_qty = row.batch_size
+ if row.batch_size and qty >= row.batch_size:
+ qty -= row.batch_size
+ elif qty > 0:
+ job_card_qty = qty
- original_start_time = row.planned_start_time
- job_card_doc = create_job_card(self, row,
- enable_capacity_planning=enable_capacity_planning, auto_create=True)
-
- if enable_capacity_planning and job_card_doc:
- row.planned_start_time = job_card_doc.time_logs[-1].from_time
- row.planned_end_time = job_card_doc.time_logs[-1].to_time
-
- if date_diff(row.planned_start_time, original_start_time) > plan_days:
- frappe.message_log.pop()
- frappe.throw(_("Unable to find the time slot in the next {0} days for the operation {1}.")
- .format(plan_days, row.operation), CapacityError)
-
- row.db_update()
+ if job_card_qty > 0:
+ self.prepare_data_for_job_card(row, job_card_qty, index,
+ plan_days, enable_capacity_planning)
planned_end_date = self.operations and self.operations[-1].planned_end_time
if planned_end_date:
self.db_set("planned_end_date", planned_end_date)
+ def prepare_data_for_job_card(self, row, job_card_qty, index, plan_days, enable_capacity_planning):
+ self.set_operation_start_end_time(index, row)
+
+ if not row.workstation:
+ frappe.throw(_("Row {0}: select the workstation against the operation {1}")
+ .format(row.idx, row.operation))
+
+ original_start_time = row.planned_start_time
+ job_card_doc = create_job_card(self, row, qty=job_card_qty,
+ enable_capacity_planning=enable_capacity_planning, auto_create=True)
+
+ if enable_capacity_planning and job_card_doc:
+ row.planned_start_time = job_card_doc.time_logs[-1].from_time
+ row.planned_end_time = job_card_doc.time_logs[-1].to_time
+
+ if date_diff(row.planned_start_time, original_start_time) > plan_days:
+ frappe.message_log.pop()
+ frappe.throw(_("Unable to find the time slot in the next {0} days for the operation {1}.")
+ .format(plan_days, row.operation), CapacityError)
+
+ row.db_update()
+
def set_operation_start_end_time(self, idx, row):
"""Set start and end time for given operation. If first operation, set start as
`planned_start_date`, else add time diff to end time of earlier operation."""
@@ -669,6 +755,15 @@
bom.set_bom_material_details()
return bom
+ def update_batch_qty(self):
+ if self.has_batch_no and self.batches:
+ for row in self.batches:
+ qty = frappe.get_all("Stock Entry Detail", fields = ["sum(transfer_qty)"],
+ filters = {"docstatus": 1, "batch_no": row.batch_no, "is_finished_item": 1}, as_list=1)
+
+ if qty:
+ frappe.db.set_value("Work Order Batch", row.name, "produced_qty", flt(qty[0][0]))
+
@frappe.whitelist()
@frappe.validate_and_sanitize_search_inputs
def get_bom_operations(doctype, txt, searchfield, start, page_len, filters):
@@ -826,6 +921,7 @@
stock_entry.set_stock_entry_type()
stock_entry.get_items()
+ stock_entry.set_serial_no_batch_for_finished_good()
return stock_entry.as_dict()
@frappe.whitelist()
diff --git a/erpnext/manufacturing/doctype/work_order_batch/__init__.py b/erpnext/manufacturing/doctype/work_order_batch/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/erpnext/manufacturing/doctype/work_order_batch/__init__.py
diff --git a/erpnext/manufacturing/doctype/work_order_batch/work_order_batch.json b/erpnext/manufacturing/doctype/work_order_batch/work_order_batch.json
new file mode 100644
index 0000000..ad667b7
--- /dev/null
+++ b/erpnext/manufacturing/doctype/work_order_batch/work_order_batch.json
@@ -0,0 +1,49 @@
+{
+ "actions": [],
+ "creation": "2021-01-04 16:42:39.347528",
+ "doctype": "DocType",
+ "editable_grid": 1,
+ "engine": "InnoDB",
+ "field_order": [
+ "batch_no",
+ "qty",
+ "produced_qty"
+ ],
+ "fields": [
+ {
+ "fieldname": "batch_no",
+ "fieldtype": "Link",
+ "in_list_view": 1,
+ "label": "Batch No",
+ "options": "Batch"
+ },
+ {
+ "fieldname": "qty",
+ "fieldtype": "Float",
+ "in_list_view": 1,
+ "label": "Qty",
+ "non_negative": 1
+ },
+ {
+ "default": "0",
+ "fieldname": "produced_qty",
+ "fieldtype": "Float",
+ "label": "Produced Qty",
+ "no_copy": 1,
+ "print_hide": 1
+ }
+ ],
+ "index_web_pages_for_search": 1,
+ "istable": 1,
+ "links": [],
+ "modified": "2021-01-05 10:57:07.278399",
+ "modified_by": "Administrator",
+ "module": "Manufacturing",
+ "name": "Work Order Batch",
+ "owner": "Administrator",
+ "permissions": [],
+ "quick_entry": 1,
+ "sort_field": "modified",
+ "sort_order": "DESC",
+ "track_changes": 1
+}
\ No newline at end of file
diff --git a/erpnext/manufacturing/doctype/work_order_batch/work_order_batch.py b/erpnext/manufacturing/doctype/work_order_batch/work_order_batch.py
new file mode 100644
index 0000000..cf3ec47
--- /dev/null
+++ b/erpnext/manufacturing/doctype/work_order_batch/work_order_batch.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8 -*-
+# Copyright (c) 2021, Frappe Technologies Pvt. Ltd. and contributors
+# For license information, please see license.txt
+
+from __future__ import unicode_literals
+# import frappe
+from frappe.model.document import Document
+
+class WorkOrderBatch(Document):
+ pass
diff --git a/erpnext/stock/doctype/batch/batch.py b/erpnext/stock/doctype/batch/batch.py
index 508e17c..07cf08a 100644
--- a/erpnext/stock/doctype/batch/batch.py
+++ b/erpnext/stock/doctype/batch/batch.py
@@ -308,4 +308,11 @@
message = "Serial Nos" if len(serial_nos) > 1 else "Serial No"
frappe.throw(_("There is no batch found against the {0}: {1}")
- .format(message, serial_no_link))
\ No newline at end of file
+ .format(message, serial_no_link))
+
+def make_batch(item_code):
+ if frappe.db.get_value("Item", item_code, "has_batch_no"):
+ doc = frappe.new_doc("Batch")
+ doc.item = item_code
+ doc.save()
+ return doc.name
\ No newline at end of file
diff --git a/erpnext/stock/doctype/stock_entry/stock_entry.py b/erpnext/stock/doctype/stock_entry/stock_entry.py
index 66f8b63..5fde35a 100644
--- a/erpnext/stock/doctype/stock_entry/stock_entry.py
+++ b/erpnext/stock/doctype/stock_entry/stock_entry.py
@@ -498,6 +498,7 @@
d.basic_amount = flt(flt(d.transfer_qty) * flt(d.basic_rate), d.precision("basic_amount"))
if not d.t_warehouse:
outgoing_items_cost += flt(d.basic_amount)
+
return outgoing_items_cost
def get_args_for_incoming_rate(self, item):
@@ -854,6 +855,7 @@
pro_doc.run_method("update_work_order_qty")
if self.purpose == "Manufacture":
pro_doc.run_method("update_planned_qty")
+ pro_doc.update_batch_qty()
if not pro_doc.operations:
pro_doc.set_actual_dates()
@@ -1076,18 +1078,45 @@
# in case of BOM
to_warehouse = item.get("default_warehouse")
+ args = {
+ "to_warehouse": to_warehouse,
+ "from_warehouse": "",
+ "qty": self.fg_completed_qty,
+ "item_name": item.item_name,
+ "description": item.description,
+ "stock_uom": item.stock_uom,
+ "expense_account": item.get("expense_account"),
+ "cost_center": item.get("buying_cost_center"),
+ "is_finished_item": 1
+ }
+
+ if self.work_order and self.pro_doc.batches:
+ self.set_batchwise_finished_goods(args, item)
+ else:
+ self.add_finisged_goods(args, item)
+
+ def set_batchwise_finished_goods(self, args, item):
+ qty = flt(self.fg_completed_qty)
+ for row in self.pro_doc.batches:
+ batch_qty = flt(row.qty) - flt(row.produced_qty)
+ if not batch_qty: continue
+
+ if qty <=0:
+ break
+
+ fg_qty = batch_qty
+ if batch_qty >= qty:
+ fg_qty = qty
+
+ qty -= batch_qty
+ args["qty"] = fg_qty
+ args["batch_no"] = row.batch_no
+
+ self.add_finisged_goods(args, item)
+
+ def add_finisged_goods(self, args, item):
self.add_to_stock_entry_detail({
- item.name: {
- "to_warehouse": to_warehouse,
- "from_warehouse": "",
- "qty": self.fg_completed_qty,
- "item_name": item.item_name,
- "description": item.description,
- "stock_uom": item.stock_uom,
- "expense_account": item.get("expense_account"),
- "cost_center": item.get("buying_cost_center"),
- "is_finished_item": 1
- }
+ item.name: args
}, bom_no = self.bom_no)
def get_bom_raw_materials(self, qty):
@@ -1524,6 +1553,36 @@
material_requests.append(material_request)
frappe.db.set_value('Material Request', material_request, 'transfer_status', status)
+ def set_serial_no_batch_for_finished_good(self):
+ args = {}
+ if self.pro_doc.serial_no or self.pro_doc.batch_no:
+ self.get_serial_nos_for_fg(args)
+
+ for row in self.items:
+ if row.is_finished_item and row.item_code == self.pro_doc.production_item:
+ if args.get("serial_no"):
+ row.serial_no = '\n'.join(args["serial_no"][0: cint(row.qty)])
+
+ def get_serial_nos_for_fg(self, args):
+ fields = ["`tabStock Entry`.`name`", "`tabStock Entry Detail`.`qty`",
+ "`tabStock Entry Detail`.`serial_no`", "`tabStock Entry Detail`.`batch_no`"]
+
+ filters = [["Stock Entry","work_order","=",self.work_order], ["Stock Entry","purpose","=","Manufacture"],
+ ["Stock Entry","docstatus","=",1], ["Stock Entry Detail","item_code","=",self.pro_doc.production_item]]
+
+ stock_entries = frappe.get_all("Stock Entry", fields=fields, filters=filters)
+
+ if self.pro_doc.serial_no:
+ args["serial_no"] = self.get_available_serial_nos(stock_entries)
+
+ def get_available_serial_nos(self, stock_entries):
+ used_serial_nos = []
+ for row in stock_entries:
+ if row.serial_no:
+ used_serial_nos.extend(get_serial_nos(row.serial_no))
+
+ return sorted(list(set(get_serial_nos(self.pro_doc.serial_no)) - set(used_serial_nos)))
+
@frappe.whitelist()
def move_sample_to_retention_warehouse(company, items):
if isinstance(items, string_types):