diff --git a/packages/run-keepass/install-sh b/packages/run-keepass/install-sh
deleted file mode 120000
index c1bedc7..0000000
--- a/packages/run-keepass/install-sh
+++ /dev/null
@@ -1 +0,0 @@
-/nix/store/m0x3gjgn720zp5plfr0bavm24iw0ip07-automake-1.16.5/share/automake-1.16/install-sh
\ No newline at end of file
diff --git a/packages/run-keepass/install-sh b/packages/run-keepass/install-sh
new file mode 100755
index 0000000..ec298b5
--- /dev/null
+++ b/packages/run-keepass/install-sh
@@ -0,0 +1,541 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2020-11-14.01; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
+backupsuffix=
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -p            pass -p to $cpprog.
+  -s            $stripprog installed files.
+  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+
+By default, rm is invoked with -f; when overridden with RMPROG,
+it's up to you to specify -f if you want it.
+
+If -S is not specified, no backups are attempted.
+
+Email bug reports to bug-automake@gnu.org.
+Automake home page: https://www.gnu.org/software/automake/
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -p) cpprog="$cpprog -p";;
+
+    -s) stripcmd=$stripprog;;
+
+    -S) backupsuffix="$2"
+        shift;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+    # Don't chown directories that already exist.
+    if test $dstdir_status = 0; then
+      chowncmd=""
+    fi
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dstbase=`basename "$src"`
+      case $dst in
+	*/) dst=$dst$dstbase;;
+	*)  dst=$dst/$dstbase;;
+      esac
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  case $dstdir in
+    */) dstdirslash=$dstdir;;
+    *)  dstdirslash=$dstdir/;;
+  esac
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+	# The $RANDOM variable is not portable (e.g., dash).  Use it
+	# here however when possible just to lower collision chance.
+	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+	trap '
+	  ret=$?
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+	  exit $ret
+	' 0
+
+	# Because "mkdir -p" follows existing symlinks and we likely work
+	# directly in world-writeable /tmp, make sure that the '$tmpdir'
+	# directory is successfully created first before we actually test
+	# 'mkdir -p'.
+	if (umask $mkdir_umask &&
+	    $mkdirprog $mkdir_mode "$tmpdir" &&
+	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+	then
+	  if test -z "$dir_arg" || {
+	       # Check for POSIX incompatibilities with -m.
+	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+	       # other-writable bit of parent directory when it shouldn't.
+	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+	       test_tmpdir="$tmpdir/a"
+	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+	       case $ls_ld_tmpdir in
+		 d????-?r-*) different_mode=700;;
+		 d????-?--*) different_mode=755;;
+		 *) false;;
+	       esac &&
+	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+	       }
+	     }
+	  then posix_mkdir=:
+	  fi
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+	else
+	  # Remove any dirs left behind by ancient mkdir implementations.
+	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+	fi
+	trap '' 0;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask $mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=${dstdirslash}_inst.$$_
+    rmtmp=${dstdirslash}_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask &&
+     { test -z "$stripcmd" || {
+	 # Create $dsttmp read-write so that cp doesn't create it read-only,
+	 # which would cause strip to fail.
+	 if test -z "$doit"; then
+	   : >"$dsttmp" # No need to fork-exec 'touch'.
+	 else
+	   $doit touch "$dsttmp"
+	 fi
+       }
+     } &&
+     $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # If $backupsuffix is set, and the file being installed
+      # already exists, attempt a backup.  Don't worry if it fails,
+      # e.g., if mv doesn't support -f.
+      if test -n "$backupsuffix" && test -f "$dst"; then
+        $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
+      fi
+
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End: